+ Reply to Thread
Results 1 to 10 of 39

Thread: Stains returning

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    .Joppa, Maryland
    Posts
    25

    Default Re: Stains returning

    Thanks Marie, I appreciate all of your help.

    This message is for Vicki who sent me a private message. I tried to answer but I'm not sure if I did it correctly. My staining problem sounds different than yours. My best suggestion is for you to post your problem on the forum and let the people with a lot more experience help you like they helped me.
    Thanks again to everyone who responded.

    Marty
    Last edited by MartyW; 08-06-2006 at 09:18 PM.

  2. #2
    Join Date
    Jul 2006
    Location
    Long Island, NY
    Posts
    13

    Default Re: Stains returning

    This sounds like a problem I’m having. Still waiting for a better test kit I ordered (not Bens) to post better numbers.
    How did the Metal Magic work? My arms are getting tiered from scrubbing the walls, and my wife thinks I’m crazy for using so much bleach in pool but I need to keep it at shock level.

  3. #3
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,008

    Default Re: Stains returning

    When you post numbers, we will be able to see what is going on with the pool. If you can scrub off the stains, then they probably aren't from metals.
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  4. #4
    Join Date
    Jul 2006
    Location
    Long Island, NY
    Posts
    13

    Default Re: Stains returning

    Yes I need to post my numbers.
    I'm going to the pool store today so they can test for metals.
    I just wanted to know if the Metal Magic worked so if I do have metals I will pick up some at the store.

    PS. the stains on my walls will not come off

  5. #5
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,008

    Default Re: Stains returning

    I would pick some up. I haven't tried it yet - I have some, but have not had any staining yet. I have read some posts on the board who have used it. It may not take the stains that have been there for a long time off - but once they are off with ascorbic acid, it is supposed to turn the metals into crystals so that they can be filtered out. YOur water may not test positive for metals if the metal has already precipitated out onto the surface of the pool. If you post your numbers, I will help you through the stain removal.
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  6. #6
    Join Date
    Jul 2006
    Location
    Long Island, NY
    Posts
    13

    Smile Re: Stains returning

    Thank you

    I'll post numbers tonight

  7. #7
    Join Date
    Jul 2006
    Location
    Long Island, NY
    Posts
    13

    Default Re: Stains returning

    The pool store said I did not have any Copper or Iron in the water.
    I’m giving you the numbers from my new test kit not from the store.

    CA=32
    PH=7.8
    TA=130
    CH=90
    CYA= 85


    I did the Vitiam C test (it took it off) and was told at the pool store to use algaecide so I thought I was fighting algae so I was keeping my CA high and scrubbing the pool.
    They did not have any Metal Magic so they sold me United Chemical Pool Stain Treat to get the stains off.
    Thank you for your help.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts