-
Re: Need help with pool...was green now light blue
No offense, but your pool store gave you worthless numbers. I have no idea what they mean.
"Total Alkalinity >100" --is this below 200? It needs to be.
PH>7.2 -- is this below 7.8?
Cyanuric Acid>0 --is this 10, 30, 60, 100? each of these values has VERY different implications.
Total Hardness>300 -- is it less than 400? Less than 500? (the limit)
Total Chlorine>1 is it higher? Is it the same as Free chlorine?, etc.
Free Chlorine>1
Now let me assume that it should be this:
Total Alkalinity =100
PH=7.2
Cyanuric Acid=0
Total Hardness=300
Total Chlorine=1
Free Chlorine=1
TA is fine, pH is at the low end of good, but above the min of 6.9
CYA = 0--you should aim for 30-50ppm
TH is fine. Vinyl you can go from 0 to 500
TC, FC=1 with cloudy water? I'd shock it up to 10 to 15ppm and keep it there and see if the water clears, and if it drops rapidly, especially at night. In the daytime, with no CYA, it can be consumed in 15 minutes by UV rays.
Keep filtering 24/7 and backwash whenever the pressure rises. If it doesn't clear, on to plan B.
Carl
-
Re: Need help with pool...was green now light blue
Surely swift meant "=" when (s)he said ">".
swift, you should say "=" if that's what you meant. ">" means "greater than". If the pool store really did mean "greater than", then they are worthless measurements.
-
Re: Need help with pool...was green now light blue
I'm sorry..I didn't think about the fact that I used the > symbol. I was using it as a pointer. Thanks for your help!!
-
Re: Need help with pool...was green now light blue
I'm right here with you swift. Exact same situation from the broken pump to the light blue water. Crazy huh? I've only been recirculating till tonight. Filtering now. I'm stickin with this thread, hopefully we can both see the bottom of our pools buy the weekend sometime.
-
Re: Need help with pool...was green now light blue
Can you see your drain yet? I've put in 32 gal. of chlorine since fri. This morning I can finally see my drain and the CL is holding at 20 ppm. Finally! On the down side my new pump sprang a leak at the housing gasket. So I'm off to throw some money at my pool store this morning. I would think hayward would replace it for free, but I can't have my pump down at this stage. Good luck
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules