Polaris Autoclear Plus Error 94??

[PatL34]

You may want to check the sensors in case they have buildup of scale or such. If so you will have to clean them with a 1 in 4 solution of muriatic acid. Make sure you add the acid to the water, and use chemical gloves and goggles for this.

Check for any loose electrical connections as well and report back.

Pat


(Supermods: This thread needs to be moved to the SWCG and Chlorinators forum)

[Poolsean]

As I hired the best Autoclear Plus tech, he said that your temperature adjustment needs to be made first.
Press the Menu button, then up arrow. The Temperature should be flashing. Increase the temperature (in 5 degree increments) to your approximate water temperature. That should eliminate the Error 94 code.

Hope this helps.