+ Reply to Thread
Results 1 to 3 of 3

Thread: Can you take a look at my test #'s?

Hybrid View

  1. #1
    duraleigh Guest

    Default Re: Can you take a look at my test #'s?

    Hi, Courtney,

    You sound like you have a good handle on your pool chemistry.

    You're using about 3ppm daily of chlorine which seems a little higher than normal but I would not call it excessive.

    AS I'm sure your know. reducing your Alk requires fairly low pH, (7.0) So I'd increase the acid dosage to keep it down there. Then, of course, aerate and re-add acid to get the pH back down in that 7.0 range.

    Sounds like you're on your way....you'll really enjoy Ben's kit....everything gets much easier (including the Calcium test which looks a little suspect...unless you filled with a water softener)
    Last edited by duraleigh; 08-09-2006 at 02:00 PM.

  2. #2
    Join Date
    May 2006
    Location
    Sanford, FL
    Posts
    385

    Default Re: Can you take a look at my test #'s?

    It may take a little more acid to reduce the PH with high ALK. Put in the quart, then test about an hour later with the pump running to circulate OR brush it around - if no effect add a little more. You don't have to wait until the next day.
    Completed 8/21/06
    14,000 gallon 3'-6' concrete pool with Diamond Brite
    Spa with spillway
    250K BTU gas heater (for spa)
    SWCG - Aqua Rite
    Hayward Super II Pump - Cartridge filter

    See pictures here http://www.philsimmons.com/family/ga...mages&keyword=

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts