Need help for pump install Tomorrow PIC!

[lmnharris]

Thanks for all the help everybody. Poconos, I was already half way through by the time I read your message, but that's an excellent Idea and would have went that way if I'd read it earlier. So the pump side is drying now, just have to make a couple fixes on the return and I'll be done.
How long does it take for that pvc cement to dry?
Thanks everybody.

[Sully]

Keep an eye on the 3 new 90s on the pump side. Those are DWV couplings, they do not handle pressure to well. Look at the difference of the new 90s and the old 90s on discharge from filter.

Crank it and check for leaks, it should be good to go by now.