+ Reply to Thread
Results 1 to 7 of 7

Thread: Noisy Hayward super pump, Lube?

Hybrid View

  1. #1
    Join Date
    Dec 2004
    Location
    .
    Posts
    14

    Default Re: Noisy Hayward super pump, Lube?

    Makes more of a buzzing sound that varies. but after 5 to 10 minutes it sounds normal.

    Kind of like extra resistance on the pump motor.

    gg

  2. #2
    Poconos is offline SuperMod Emeritus Whizbang Spinner Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars
    Join Date
    Dec 1969
    Location
    Honesdale PA
    Posts
    1,802

    Default Re: Noisy Hayward super pump, Lube?

    As for the windings on a motor, they either work, don't work, or smoke (shorted winding) and pop a breaker. More questions:
    -- Is it pumping water for the 5-10 minutes until it quiets?
    -- Are there air bubbles visible in the pump basket during this period?
    -- Does it only do this on a cold start? i.e. what happens if it comes up to temperature after a half hour or so, you shut it down for 10 minutes, and restart it.
    -- What is the filter pressure doing during this 5-10 minute period of noise?
    -- Does the noise gradually disappear or is it suddenly quiet?
    -- Did this problem suddenly appear or did it come on gradually?
    Answers to these will help us diagnose the problem.
    Al

  3. #3
    Join Date
    Dec 2004
    Location
    .
    Posts
    14

    Default Re: Noisy Hayward super pump, Lube?

    As for the windings on a motor, they either work, don't work, or smoke (shorted winding) and pop a breaker. More questions:
    -- Is it pumping water for the 5-10 minutes until it quiets?

    Yes water is pumping fine.

    -- Are there air bubbles visible in the pump basket during this period?

    Minimal bubbles

    -- Does it only do this on a cold start? i.e. what happens if it comes up to temperature after a half hour or so, you shut it down for 10 minutes, and restart it.

    No noise after warm/shutdown/restart

    -- What is the filter pressure doing during this 5-10 minute period of noise?
    Gauge not working now

    -- Does the noise gradually disappear or is it suddenly quiet?

    I think it just fads away. Usually happens at morning startup go inside, come back, no noise.

    -- Did this problem suddenly appear or did it come on gradually?

    Did it last year also, pump is 5 years old, just wondering if I should or can do anything.

    gg

  4. #4
    Poconos is offline SuperMod Emeritus Whizbang Spinner Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars Poconos 4 stars
    Join Date
    Dec 1969
    Location
    Honesdale PA
    Posts
    1,802

    Default Re: Noisy Hayward super pump, Lube?

    My best guess is a motor bearing. Sometimes they get a little noisy until they warm up and then quiet down. My superpump sometimes does that when I start it in the Winter when the temps are low, and a friend has a Hayward that's been really noisy for over a year and is still going fine. My recommendation...ignore it until it gets worse. Very low probability of a catastrophic failure.
    Al

  5. #5
    Join Date
    Dec 2004
    Location
    .
    Posts
    14

    Default Re: Noisy Hayward super pump, Lube?

    Start up this morning no noise.

    I have also notice a split second delay when I switch it on. I do mean split second.

    gg

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts