+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 20 of 41

Thread: Where to start?

Hybrid View

  1. #1
    Steve #1 is offline ** No working email address ** Steve #1 0
    Join Date
    Aug 2006
    Posts
    39

    Default Re: Where to start?

    Quote Originally Posted by GraceByDesign
    ETA: keep it at shock levels until you have O CC, then let it drift back down to 8 or so, if you keep the high CYA

    And remind me how I get this measurement again.

    BTW: My first thought was water balloons, I just scaled it up to trash bags.

    I can't find wide enough sheets of plastic.... I'm still liking the trash bag idea.

  2. #2
    Steve #1 is offline ** No working email address ** Steve #1 0
    Join Date
    Aug 2006
    Posts
    39

    Default Re: Where to start?

    Well I decided to take the plunge and lower my CYA, but alas no BIG PLASTIC SHEET.

    In the future, please refer to this as "Steve #1's Trash-bag Method". I thought I had an industrial size box of 33 gal trash bags but they were only 13 gal so I got started with the small box of 33 gal that I had. I'll hit the store for another box later.

    I'm not planing on keeping it completely full, but this should be better than just draining it without replacing as I go.

    And for those of you that didn't think i was crazy enough to do it......


    Last edited by Steve #1; 08-25-2006 at 05:01 PM.

  3. #3
    Join Date
    Apr 2006
    Location
    Scottsdale, Arizona
    Posts
    523

    Default Re: Where to start?

    Texans are a strange breed ... and I though the guy with the plywood pool was a little off


    So do you add a bag of water every so often to keep the level at your desired height ? Do you put the bags in the pool to fill ?


    keep us posted on your progress.....
    14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7

  4. #4
    Steve #1 is offline ** No working email address ** Steve #1 0
    Join Date
    Aug 2006
    Posts
    39

    Default Re: Where to start?

    So with my CYA of 200ish and hardness of 460, about how much water should I plan on replacing?

  5. #5
    Steve #1 is offline ** No working email address ** Steve #1 0
    Join Date
    Aug 2006
    Posts
    39

    Default Re: Where to start?

    Well siphoning with the vacuum hose in to the yard goes faster than the fill hose.

    The method is:
    1) Remove bag from box.
    2) Bundle up open end of bag
    3) stick bag in the pool
    4) stick hose in open end of bag and fill while still holding the opened end of the bag gartered up and above the water surface.
    4.5) CAUTION THIS IS THE HARD PART Tare off a 5" strip of duct tape using only one hand (you didn't think a Texan could pull off something this technical without using duct tape did you).
    5) When bag is full enough that the part you have bundled up around the hose starts to pull, take the hose out give the bag a spin, put a goose neck in the end of the bag and tape it closed.

  6. #6
    Join Date
    Jun 2006
    Location
    Northern Kentucky
    Posts
    174

    Default Re: Where to start?

    Thanks for the laugh!
    They don't look as much like water balloons as I expected! Mostly looks like you need to skim your pool REAL bad!

    ETA: if you are shooting for 30-50 CYA, that means at least 75% of your pool volume. 75% should get you to 50ppm.
    That's a LOT of trash bags!!!
    Last edited by GraceByDesign; 08-25-2006 at 06:19 PM.
    ~Grace

    Avid reader of this forum
    but alas, no pool... yet!

  7. #7
    Join Date
    Apr 2006
    Location
    Scottsdale, Arizona
    Posts
    523

    Default Re: Where to start?

    LMAO... Man your killing me over here as well

    I'd say with a CYA of 200, you'd be best off replacing as much water as possible or at least 3/4 of it and then install a salt system . I'm buying Glade stock as we speak
    14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7

  8. #8
    Join Date
    Apr 2006
    Location
    Country Living in Comal Co., Tx
    Posts
    81

    Default Re: Where to start?

    Quote Originally Posted by Steve #1
    Well I decided to take the plunge and lower my CYA, but alas no BIG PLASTIC SHEET.

    In the future, please refer to this as "Steve #1's Trash-bag Method". I thought I had an industrial size box of 33 gal trash bags but they were only 13 gal so I got started with the small box of 33 gal that I had. I'll hit the store for another box later.

    I'm not planing on keeping it completely full, but this should be better than just draining it without replacing as I go.

    And for those of you that didn't think i was crazy enough to do it......
    Steve, this is pure redneck tech.

    I can just hear you explaining to the parents when they bring the kids to the birthday pool party...

    "A big BASH??......no, no, no...I said some big TRASH!"

+ Reply to Thread

Similar Threads

  1. Day 1, where to start?
    By sturev in forum Testing and Adjusting Pool Water Chemistry
    Replies: 7
    Last Post: 06-05-2010, 05:34 PM
  2. Sand filter changed @ start of season ? HIGH PRESSURE @24 PSI FROM START
    By timmygreene in forum Pool Equipment & Operations
    Replies: 8
    Last Post: 05-21-2010, 07:48 AM
  3. Where do I start first?
    By jen in tx2 in forum Dealing with Algae & Slime
    Replies: 10
    Last Post: 09-10-2009, 11:54 PM
  4. Help - where to start?
    By kevinm in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 4
    Last Post: 10-01-2006, 07:05 PM
  5. My Start-up. What do you think?
    By Allora in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 05-31-2006, 08:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts