Oh My Gosh....silicone seal? You're opening a can of worms. Just joking, you may find out that some here say you don't even need to stick it in place. Last fix on mine I used SS too. Only I cleaned out the channels, squished a liberal amount of seal in them, placed the gasket, then put a wax coated plastic sheet over the gasket...wax paper will work fine I now know, then bolted the thing together and let the spring force the upper part onto the gasket. Let it cure for a day. The wax paper keeps the silicone from sticking to the top part and silicone seal won't stick to wax paper. Use a box cutter blade or an X-Acto knife to trim off excess silicone and it's been holding just fine.
Al
PS: With silicone seal, duct tape, and PVC you can do just about anything.