What to do with solar cover

[tenax]

i love the idea of the pcv pipe..i was not looking forward to trying to "fold" the cover or roll it up conventionally..that also allows me to store in my garage rather than basement ***uming one thing.that cold weather won't hurt it? still a question in my mind...

otherwise, my thinking is i would get or construct a pipe long enough so that there was a foot on either end open..that then would be 2 clear suspension points (something like those bigger pipe hangar brackets......that i think would bear os the weight..but i would then use 2 nylon straps with foam pieces for padding about a 3rd and 2/3 of the way down the pvc pipe..the nylon straps would anchor on the wall on big nails..

something like that..that's how i "envision it. i also like it cause as i roll the cover onto the pipe i can do the cleaning of the outside bit by bit before storage.

[Poconos]

Sounds like your idea will work fine. My pipe is about 15' because I roll the cover while in the pool for normal on and off thus the pipe has to be less than the width of the pool. At 16' the 2" pipe will sag so depending on your width you may want to go to 3". I don't think cold or freezing should hurt it. Before I store it I stand it on end and tie it to a deck rail so the wind doesn't get it. Sheets are to protect the bubbles from the straps and the 5 gal buckets on top keep the rain out. Two are in the pic, one is a cheapo that will get cut up for end pieces eventually.
Al

Attachment 550

[tenax]

good point on the tube, maybe..my cover is 18 ft at widest point, 13 at narrowest (kidney) i have 5 of those tie down straps on hand with hooks on the end and adjustable cleats so i plan to use those to support...one about every 3 ft or so and i think even with 2 inch tube it should be fine, eh?

[doggie]

We leave ours on the reel and cover it with a winter cover. We got one 2' longer than needed so we could completely close the reel inside the bag. All we do is make sure all the excess water has drained off, then remove the reel (with the cover rolled up on it) from the side reel holders and put it right inside the bag, zip it up and tie it closed on the ends. We leave it laying right next to the pool all winter. It works great, and we've never had any damage as a result of it being left outside.

http://www.intheswim.com/Winter-Pool...Blanket-Covers

[matt4x4]

Here's how I store mine for the winter -
I roll it up on the roller, then turn it half a rotation per day for about 1-2 weeks - this makes sure all water will eventually roll out of it.
Then I just leave it "as is" on the posts where the roller is mounted with a long piece of plastic bungeed around it as a final protective layer.
It's made from plastic and the winter will not hurt it, year 3 of doing this on a 3 yr cover that's on it's 4th year - still looks almost new.

[tenax]

matt, doggie..you guys leave it outside over winter..i know you have snow, cold and humidity matt..what about you doggie? i considered leaving it on the roller and tarp cover the whole thing and bungie..that would definitely be simpler if the weather won't hurt it..mine is over 20 ft wide so no way i can store in the garage, but i do have lots of room to put it on the side in my yard.

[tenax]

ps- i took a look at the cover and like the idea of it being completely enclosed with it, but i have exactly that plastic stand and i'd be concerned about the ends being open..i guess i could put a hefty bag around each end..maybe cheaper to buy a tarp, though

[doggie]

We live in West Michigan right near the lake. We get what they call 'lake effect' weather, so our winters are brutal.

Does your reel tube come off the plastic ends tenax? Ours just pull right out, and that's why we can seal up the entire cover and reel tube (since we were smart enough to get the next size longer that is)