Yes, we are in agreement now that I understand your priorities you were describing. I absolutely agree that getting the sanitizer level up (i.e. adding chlorine) is first and foremost in importance. I would also add the TA and CH very shortly thereafter as it is also important, but not quite as time-critical.
I don't believe the pH is as critical since the higher pH actually makes the water less corrosive and "buys time" until the TA and CH are adjusted. The chlorine is most important, but the pH, especially a high pH, is not a problem at all when the TA and CH are so low. Once the TA and CH are added, then the pH can be adjusted. If the pH creeps up too much and/or the water gets cloudy when adding the TA and/or CH, then the pH can be lowered with acid before more TA and CH are added.
Richard

Reply With Quote
Bookmarks