Closed Thread
Results 1 to 4 of 4

Thread: Step by step instructions

  1. #1
    Join Date
    Dec 1969
    Location
    .
    Posts
    1

    Default Step by step instructions

    I just came across this step by step illustrated pool closing procedure wich seems to be well made and instructive. It comes from a canadian website. Maybe some of you out there can benefit from this illustrated explanation and/or comment on any flaws it may contain.

  2. #2
    Join Date
    Mar 2006
    Location
    Dothan Alabama
    Posts
    71

    Default Re: Step by step instructions

    Can't comment on the procedures described since we don't close our pool here. I can comment that the grammar and spelling on every page leave something to be desired to say the least!

  3. #3
    Join Date
    Dec 2005
    Location
    missouri, usa.
    Posts
    20

    Default Re: Step by step instructions

    One mistake that I noticed was on step #6 where it says to move the control valve lever to FILTER without cutting the power to the pump. As far as I know, that is a major no-no with rotary control valves. My Hayward filter says to NEVER move the lever without turning the pump off first.

    If I am wrong, correct me.

  4. #4
    CanuckPool is offline *Removed User* Weir Watcher CanuckPool 0
    Join Date
    Jul 2006
    Posts
    224

    Default Re: Step by step instructions

    I noticed that too, but they even went ahead and underlined the word "without" so maybe its ok if you have this particular model.

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts