+ Reply to Thread
Results 1 to 9 of 9

Thread: Pump Problem

Hybrid View

  1. #1
    Join Date
    Dec 2004
    Location
    Guelph, ON, Canada.
    Posts
    58

    Default Re: Pump Problem

    The loose joint you tightened also should explain where the air was getting into your system to have bubbles.

    You may want to start a new thread as this thread is listed as a pump problem, which has now changed to concrete problem.

    I have similiar cracks, as well as some cracks elsewhere, in my stamped concrete deck. The PB told me the same info
    Last year water got into these cracks and froze during winter. The expansion during freezing broke out some small chips which cannot be easily fixed. I don't know if you get freezing weather in the winter, if so, I would make sure I have a good coat of sealant on the concrete especially over the cracks.
    Last edited by cschnurr; 10-03-2006 at 12:36 PM. Reason: typo
    Carl Schnurr
    96,000 litre inground, vinyl liner, 1 HP 1speed pump, sand filter, SWG, installed 2005.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts