+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 20 of 30

Thread: ehorn's pool build

Hybrid View

  1. #1
    ehorn is offline Registered+ Thread Analyst ehorn 0
    Join Date
    Dec 2004
    Location
    Tucson, AZ, USA.
    Posts
    60

    Default Re: ehorn's pool build

    I think it's only going to take another couple weeks to finish. We have only one major thing that might prevent that, I measured the shallow end and it seems like it's 6" too deep. Might not sound like much but my wife would be under water only 5' from the edge of the pool. Also it won't pass code, code says that the shallow end shall be no more than 3'6" deep and slope at no more tan going down 1' for every 7' out.

    The superintendant will be measuring the pool next week which is what will be holding up the deck layout because they dont' want to have to shoot more gunite over new deck.

    Ok thats a long answer but we'll be done before xmas. I'm keeping my fingers crossed!

  2. #2
    ehorn is offline Registered+ Thread Analyst ehorn 0
    Join Date
    Dec 2004
    Location
    Tucson, AZ, USA.
    Posts
    60

    Default Re: ehorn's pool build

    We got some good news today, the depth of the pool is correct so I guess it was just my imagination but I had measured it as too deep. They did go ahead and lay out the deck but prior to us actually confirming that the plan was correct. The sales guy will be out Thursday morning to review the plans and make changes. It is starting to come together fast and the pool should be done in a week or two once the deck is poured which could be Friday or Monday.









+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts