Frustration abounds me

[matt4x4]

J hook liners should fit relatively well, the tems are pretty low for it to get nice and soft/stretchy.
With mine, it was actually a case of it being too big by 6" but having a 30 foot round pool, I was able to just adjust it and eliminate the excess.
When i did our neighbour's, I started to assemble the top rails as I placed the liner to hold it all in place because things wanted to buckle and fall inwards, this allowed me to pull the liner every once in a while giving it a nice even snug fit, and the assembled portions stood up strong and kept things from wanting to fall appart.

[Cal_Newbie]

I tried several different techniques..one with without the top rail supports so that I could gain some flex and started trying techniques when I used to install carpeting. Close, but no cigar and it just really worked hard on the walls.

Next was installing the top rail supports to hold the shape of the pool, again...air ball..........no good. GRRRRRRRRRRRRRR. Exacto knife was looking very pleasant to me at that time.

Correct liner? No expert by all means of this but, given how close this is, it all looks right. Seams on cove in the right spot, etc.

Sooooooooooooooooooooooo. I am calling in the pros and let them deal with this. Can't make it until next week so I may give it the ol' college try one last time. Any other advice?

Bob-