Does anyone know how to wire a 2 speed pump (Northstar) to Aqualogic controls? The installation instuctions talk about wiring the primary filter pump, but not an additional 2-speed pump. I don't care if I use a toggle switch for the additional pump.
Wiring of a 2-speed pump
Does anyone know how to wire a 2 speed pump (Northstar) to Aqualogic controls? The installation instuctions talk about wiring the primary filter pump, but not an additional 2-speed pump. I don't care if I use a toggle switch for the additional pump.
Last edited by mmcguire; 01-16-2007 at 12:39 AM.
Matt
Owner/Builder, 28,000 Gallon IG swimming pool.
Re: Wiring of a 2-speed pump
My Aqualogic came with an installation manual that shows how to wire a 2-speed pump. Check the goldline controls web site and download the installation manual and see page 15.Originally Posted by mmcguire
http://www.goldlinecontrols.com/Supp...ls/092042f.pdf
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Posting Permissions
Reply With Quote