I have a Raypack heater and would like to install an AutoPilot SWG. As seen in the picture below the Inflow and Out flow seem to be to narrow or close together for the SWG unit.
Will I have any issues installing with this spacing.
many thanks,
Heater/Raypack 2100 and AutoPilot SWG
I have a Raypack heater and would like to install an AutoPilot SWG. As seen in the picture below the Inflow and Out flow seem to be to narrow or close together for the SWG unit.
Will I have any issues installing with this spacing.
many thanks,
Last edited by slater1182; 02-05-2007 at 11:45 PM.
Posting Permissions
Reply With Quote