+ Reply to Thread
Results 1 to 10 of 11

Thread: Concerns about bleach with vinyl liner (IG)

Hybrid View

  1. #1
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Posts
    2,210

    Default Re: Concerns about bleach with vinyl liner (IG)

    Pouring slowly in front of a return away from the edge (as far as you can reasonably stretch) will not concentrate enough chlorine to cause a problem. Another alternative that you can do is to take a large bucket of pool water and put some of the chlorine in it to pre-dilute it before adding it back to the pool, but I really think that's overkill.

    If you always poured the chlorine in the same place and the tear/hole was in that place (especially if there was no return in that area), then that might be a valid correlation.

    Much more likely is that the sun degraded the vinyl. UV radiation certainly breaks down the coloring in vinyl so it could also, over time, break down the structural components as well. This link is one of many that talks about this.

    Richard

  2. #2
    nater is offline Registered+ Weir Watcher nater 0
    Join Date
    Dec 2005
    Location
    South Carolina
    Posts
    129

    Default Re: Concerns about bleach with vinyl liner (IG)

    My parent's vinyl liner gave up on the sunniest side after about 13 years, they've always only used pucks. My dad's home owner's insurance helped cover the replacement cost, not sure how/why. And no, he's not a scammer
    Nater
    16x32 Vinyl IG, 20,000 gal, Autopilot DIG-220 w/60 series cell, Dolphin Diagnostic Pool Boy

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts