The length of time will vary depending on your system and your local temps. Here are my two simple rules. The hotter it gets the more you run it. If you ever have water issues let it run until they are resolved.
That's how I do it anyway, Dennis
The length of time will vary depending on your system and your local temps. Here are my two simple rules. The hotter it gets the more you run it. If you ever have water issues let it run until they are resolved.
That's how I do it anyway, Dennis
AG pool installer
Arizona
damn, did not realize it requires that much time
A 3/4 HP uprated superpump should deliver 50-60 GPM depending on your head loss. So worse case, you will have a 3 hour turnover. Therefore, you shouldn't need to run the pump more than 6 hours and could go down to as little as 3 but it really depends on how clean you want your water.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Have I been wrong to run my pump 24/7?
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Do any of you guy use a timer for your pump? I'm the type who'll forget to turn it on, or turn it off at least twice a week...
I have had mine on a digital outdoor timer, but i'm scrapping it this year and going to analog, the digital drops the program every time we get a "blip' and being out in the country, blips are relatively common, the worst that will happen on an analog is the cycle will be off by x hours - x being the length of the power outage, but a blip can shut it down for a week if I'm away.