Indoor, inground, lined, some loss, heres what I plan.

[newbie2715]

OK,

So I hit the local pool supply company and purchased some Boxer Brand adhesive. I am planning on removing the plate and rounding out any sharp edges of the tears (to avoid a further rip later).

Then i plan on cutting the extra vinyl and going at least 1 inch larger than any of the "holes".

I plan on letting that sit for a day or two and then cleaning the skimmer plate screws up and getting a new gasket to replace the one that comes off.

I will top off the gasket application with Silicone seal, and reinstall the skimmer plate.

Have I left anything out?



** Also I edited the last pic with Paint to outline the issue!**