Back-wash hose busted.

[CarlD]

There's a simple screw-in fitting on the filter for the backwash that can be replaced with either 1.5" or 2". I replaced it with 2" because the heavier backwash hoses are 2" and that's mine.
I just hose-clamp it on.

[freddyttt]

Mine popped to.....3 times.

[brittmer]

After the second hose I plumbed mine with pvc and it works great!

[Pool_Mike]

I just received a 2" hose, to find out that my old hose is 1.5", can I just use the 2" w/o any adjustments and just clamp it back on as it was on the 1.5"?

[cleancloths]

That should be no problem to do, but I hard piped mine as well, much nicer looking. I have it piped into a drainage pipe underground.

[KurtV]

I bought a 1.5 inch firehose off ebay; it'll last a long time only using it 6 or 8 times a year. I got one or two backwashes out of those silly PVC hoses before they parted.

[Pool_Mike]

Man what a huge difference in backwashing from 1.5" hose to 2" hose. Water drains much quicker.
Works great. Thanks!!

[freddyttt]

I bought a 1.5 inch firehose off ebay; it'll last a long time only using it 6 or 8 times a year. I got one or two backwashes out of those silly PVC hoses before they parted.

wow great Idea...are they easy to wind up and store?

anything negitive about using one of them,
or is it as great as it seems with no drawbacks.

tommy