+ Reply to Thread
Results 1 to 3 of 3

Thread: CYA Test Reliability

Hybrid View

  1. #1
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Posts
    2,210

    Default Re: CYA Test Reliability

    Yes, I would consider it accurate. I tested my CYA level now that the pool is open for use again and it is lower than at the start or in the middle of the winter. CYA typically drops over the winter and in my case I had maintained chlorine levels. It may drop to zero if no chlorine is in the water -- anaerobic bacteria consume CYA and produce ammonia. With chlorine in the water, I'm not sure what happens but chlorine does break down CYA albeit very slowly at normal pH and low chlorine concentration.

    Richard

  2. #2
    NWMNMom is offline Registered+ Widget Weaver NWMNMom 0
    Join Date
    Nov 2004
    Location
    WAAAY NW Minnesota
    Posts
    461

    Default Re: CYA Test Reliability

    As usual, mine was almost nothing when I opened and topped off. We had several inches of rain after closing, then snowmelt and use a Arctic Armor mesh winter cover so it goes right into the pool. We are adding bit by bit to get back up there.
    Beats driving to the lake!
    18'x33'x52" AG oval, hard plumbed system, 22" Pentair Meteor Filter 1.5hp pump, Goldline SWCG System, 2/4x20 SolarBear Panels, Biltmore Steps - 16x14' composite deck, Pool Rover Jr

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts