+ Reply to Thread
Results 1 to 2 of 2

Thread: Will this pump/filter work?

  1. #1
    mjs31 is offline Registered+ Thread Analyst mjs31 0
    Join Date
    Jun 2006
    Location
    Texas
    Posts
    81

    Default Will this pump/filter work?

    I found out that the pool I am getting does come with the basics including the following.

    Waterway 1.5HP 1 speed pump with 22" Sand filter. Apparently this is a kit combo.

    My pool is a 24' 54" deep round Emerald Isle (artesian). I am wondering if I would be best to buy a smaller pump since 1.5hp is over kill or just use this one? If I do can I still use the Waterway sand filter or should I get something else?

    Thanks

  2. #2
    Join Date
    Dec 1969
    Location
    Oklahoma city, Oklahoma, USA.
    Posts
    8

    Default Re: Will this pump/filter work?

    I am not sure but I put a 1 1/2 hp pump on a 18in sand filter and when I try to vac the pool the hose sucks together and air get in the line. also when the automatic cleaner is vaccumeing the pool it also sucks up air. I also question if my pump is to strong for the filter. The pump reads a flow rate of 90 gpm.
    the filter a haward S180t it said 20gpm filtration rate. Like i said I get air in my lines, Iknow my hoses dont leak the only place i cant tighten is the skimmer to the pool, I am afraid of breaking the plastic the screws srew into. any help would be great.
    Last edited by KWBourn; 05-23-2007 at 06:53 PM. Reason: more info
    Kurt Bourn
    24' round 12,000 gal
    Oklahoma City

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts