I have read, printed, and even called Mr. Kinch about his system. He uses ORP sensors, and a computer running Linux to control his system. Mine is not nearly that sophisticated. My pool manager (Wife) tests daily and adjusts the speed of the pump just like she did when we used an erosion feeder and pucks (before we got educated (here)).

I considered probes and controller but the technology is not what I think it should be and the equipment is not cheap. I tried a bunch of different probes (see my old posts) and had poor results.

I'm more than willing to do a "how to", but it will have to be somewhere else (not in this thread or forum) --- Possibly in the Chlorine Feeder, Off Topic or China Shop. I'll leave that up to the moderators. It may be better to do it privately.

Another consideration is the multitude of different arrangements in plumbing and systems. I know how mine works down to the pump curves and insulation on the pipes. Having someone follow my directions and mess the whole system up could be disastrous and obviously I am not willing to accept any liability.

AL, Janet, Carl, Watermom ----- your decision. Perhaps you would want to move the last couple posts too ---- I don't care.