+ Reply to Thread
Results 1 to 7 of 7

Thread: Mars HP Freshly installed - First Impressions/Questions

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    Mantua, NJ
    Posts
    22

    Default Re: Mars HP Freshly installed - First Impressions/Questions

    I run mine under the solar cover. You may have your hose tangle until the residual coils are gone. Remember to lay your new hose out in the sun to help remove the coils.

    Joe

  2. #2
    Join Date
    Aug 2006
    Posts
    41

    Default Re: Mars HP Freshly installed - First Impressions/Questions

    Thanks Joenj, wasn't sure if I needed to worry about the cover.

    The cleaner is definately improving in its climbing ability. I did angle the jet wand things that hangs off the back to the side a little from straight down. It now comes about a foot from the water line in the deep end. Still need to sort out the shallow end problems. I will play some more over the weekend after I check the float positions and let the hose straighten out on the deck for 4 hours in the sun.

    It does do a good job though on the areas it hits. I have been brushing the areas it does not really go over towards the deep end. Pool looks really clean when its finished its 3 hour tour.

    Once again thanks to you Waterbear for the assistance as well.
    62,800 Litre IG Vinyl
    1HP Super Pump
    Clearwater LM2-24S SWG
    250K NG Heater
    Mars HP Pool Sweep

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts