Polaris Hose disconnects

[donfranko]

Anyone know how to keep the Polaris hose connected ? Those threaded plastic nuts are impossible to get over the hose once it is connected to the male end.

Anyone have any suggestions that worked for them? Thanks.

[vgg659]

>> Those threaded plastic nuts are impossible to get over the hose once it is connected to the male end.

You are sliding the nut onto the hose, and then attaching the hose to the male connector, then attempting to position the nut. This is wrong.

Place the nut on the male connector, slide the host onto the connector, and tighten the nut. By tightening, the nut should screw away from the connector.