+ Reply to Thread
Results 1 to 10 of 31

Thread: Lowering TA with Dry Acid Or Muriatic Acid

Hybrid View

  1. #1
    Join Date
    Aug 2006
    Posts
    3

    Default Re: Lowering TA with Dry Acid Or Muriatic Acid

    So what effect would an in line "ozonotar" have on the aeration process? (In other words assume I need to Lower TA a lot but need to keep pH where she is now basically).

    My assumption is, it is already performing that aeration to a large degree. But not knowing how the introduction of O3 may effect the offgas of Co2, I am not sure. Thoughts?
    Last edited by TheG$; 06-19-2007 at 09:14 PM.

  2. #2
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Posts
    2,210

    Default Re: Lowering TA with Dry Acid Or Muriatic Acid

    The ozone will get converted to oxygen gas rather quickly and will essentially outgas oxygen from the pool (and such oxygen bubbles will pull carbon dioxide from the pool) since it is already saturated in oxygen (from being in equilibrium with oxygen in the air). I do not know the rate of ozone generation in a typical ozonator so can't comment on how good it is at aeration compared to an SWG. You could certainly try the TA lowering process with the ozonator off and on at different times and compare the rate of TA lowering. It's clearly going to be better with it on than off -- I just don't know by how much.

    Richard

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts