Frustrated with Pool, it just won't clear up

[l8nite4me]

My test kit only goes to 5 for chlorine, how do I test for results above that number?

Thx in advance

[ccostan]

My test kit only goes to 5 for chlorine, how do I test for results above that number?

Thx in advance

You can use parts Distilled water to get higher results.

1/5 Pool water + 4/5 Distilled water should allow you to go up to 25 in your testing.

CARLO.

[l8nite4me]

You can use parts Distilled water to get higher results.

1/5 Pool water + 4/5 Distilled water should allow you to go up to 25 in your testing.

CARLO.

You have totally blown my mind on that statement. Are you saying I add 1/5 pool water and 4/5's distilled water to my test kit then add the drops for chlorine testing?

Then what, multiply the read out by, I would assume 5 based on the ratio?

It's been alot of years since college chemistry and math.

Thx in advance

[ccostan]

You have totally blown my mind on that statement. Are you saying I add 1/5 pool water and 4/5's distilled water to my test kit then add the drops for chlorine testing?

Then what, multiply the read out by, I would assume 5 based on the ratio?

It's been alot of years since college chemistry and math.

Thx in advance

Yep. I referenced this thread for sanity as well. http://www.poolforum.com/pf2/printthread.php?t=7496

Carlo.

[dawndenise]

My test kit only goes to 5 for chlorine, how do I test for results above that number?

Because you have to test for a much higher level of chlorine, you may want to invest in a FAS-DPD test that can go much higher reliably. I think it will measure up to 50 - not that you'd be going quite that high... While the dilution/shot glass method will work, I never felt all that convinced that my results were correct, so I was quite glad when I received my kit that included the FAS-DPD for chlorine.

It's possible to buy just the FAS-DPD test for chlorine without buying an entire kit. Look for CarlD's reply #6 in this thread:

http://www.poolforum.com/pf2/showthread.php?t=7505

[l8nite4me]

Alright, just went home to check the status of the pool. It is about 80% clear now and more blue than green, so I am assuming things are getting in control.

I adjusted the Chlorine up to about 22ppm and will test again in 8 hours and adjust again if needed.

I will keep you posted on the results.

Thanks everyone for all the help, I know my family will appreciate tremendously.

[duraleigh]

The dilution method for testing chlorine above 5ppm with an OTO test is wildly innaccurate. 1 to 1 dilution might get you in the ballpark but a 4 or 5 to 1 test I would trust like a used car salesman.

The FAS/DPD method is really the only RELIABLE way to test much above 10ppm. You would probably get closer by waiting 'til Cl goes to 5 or below and calculating what you need to bring it up to a desired level.