+ Reply to Thread
Results 1 to 7 of 7

Thread: Help with my Algae problem

Hybrid View

  1. #1
    Join Date
    May 2006
    Posts
    16

    Default Re: Help with my Algae problem

    Here is a picture of what I've got after day 3. I just vacuumed but left a spot on the middle so you can see the green tint.





  2. #2
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Posts
    2,210

    Default Re: Help with my Algae problem

    Is your HTH test kit using test strips or liquid drops for testing? Specifically, for the CYA test do you mix half pool water with half CYA reagent and then mix for 30 seconds and then pour into a tube until the black dot at the bottom is no longer visible? Or do you measure some color on a test strip? If the latter, CYA test strips tests are notoriously inaccurate. I suggest you get yourself a good test kit, the Taylor K-2006 from Taylor here or from Leslie's here or other stores or you can get a kit similar to what Ben used to sell on this site at tftestkits here.

    Also, from the picture it looks like there is no floor drain so while shocking have you been using a pool brush to mix the water in the pool, especially in the region near where the greenish color is showing up at the bottom? Have you tried running your pool sweep during this time?

    Richard

  3. #3
    Join Date
    May 2006
    Posts
    16

    Default Re: Help with my Algae problem

    Quote Originally Posted by chem geek View Post
    Is your HTH test kit using test strips or liquid drops for testing? Specifically, for the CYA test do you mix half pool water with half CYA reagent and then mix for 30 seconds and then pour into a tube until the black dot at the bottom is no longer visible? Or do you measure some color on a test strip? If the latter, CYA test strips tests are notoriously inaccurate. I suggest you get yourself a good test kit, the Taylor K-2006 from Taylor here or from Leslie's here or other stores or you can get a kit similar to what Ben used to sell on this site at tftestkits here.

    Also, from the picture it looks like there is no floor drain so while shocking have you been using a pool brush to mix the water in the pool, especially in the region near where the greenish color is showing up at the bottom? Have you tried running your pool sweep during this time?

    Richard
    I'm using the drops. Yes, I use the drops half water/ half CYA reagent to test CYA.

    There is no drain, just a skimmer and a return. I've been brushing/vacuuming at least 3 times a day.

    I'm going to order a better test kit. Just hoping I can get this under control before the new kit arrives.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts