I believe the Taylor Test Kit user manuals refer to a 'slug' method of adding acid which is supposed to affect TA more than pH. However this has been debunked elsewhere on the site.
I believe the Taylor Test Kit user manuals refer to a 'slug' method of adding acid which is supposed to affect TA more than pH. However this has been debunked elsewhere on the site.
Carl Schnurr
96,000 litre inground, vinyl liner, 1 HP 1speed pump, sand filter, SWG, installed 2005.
I put mine in a single stream in front of the deep end return with the pump on. I add acid on a regular basis and I watch the plume to make sure it is hitting the return jet and mixing in. For me, that is a little to the side of the jet....
Salinda
owner of ~35,000 gallon plaster IG pool/spa combo. Ikeric Dyna-Miser VS150 filter pump, 2 hp whisperflo spa jet pump, The Pool Cleaner 2x suction cleaner, Clean & Clear Plus 520 cartridge filter, Zodiac Clearwater LM2-40 SWG, Sta-rite 400k heater, solar heat pads and coils.
I pour it in front of the deep end return with the pump running.
Tom Wood
15K IG Plaster, Sand Filter, Polaris 180
Gargle , rinse , swish and spit......![]()
14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7
Phillbo, I thought your teeth looked unusually bright![]()
Hal
20x40 IG gunite free form, approx. 27K gal, 60sq DE filter, Jandy Stealth 2hp 2speed pump, Polaris 380, SWCG
Speaking of distribution methods, has anyone seen or heard of this....
http://www.aquaservicedist.com/SMART...G-p-16866.html
If this thing really works and does not damage anything where the Acid enters the pool, then I'm sold. Talk about a maintenence free pool!!Just about the only thing I have to to most of the summer is add acid to keep ph in check