Hi all,

I have had my autopilot dig 220 with the 48 cell for about 3 years. I just noticed that the red check light is flashing and it says low cell amp output. I checked the manual and tried cleaning the cell. That did not work. I also tried power cycling the unit. At first it worked for about 20 seconds it showed 26 volts and about 6 amps. Then it droped to 1.7 amps and the light flashed again. Now it is at .2 amps and 29 volts. The salt level shows to be 3600ppm. Any ideas on what it could be? The manual says it could be a dead cell or power supply problem. If it is the cell it seems a bit premature.Thanks for any information you can provide me.