In my vinyl pool, they are mounted well above the water line at the top of the coping, but they are anchored in the deck concrete.Originally Posted by crosso
In my vinyl pool, they are mounted well above the water line at the top of the coping, but they are anchored in the deck concrete.Originally Posted by crosso
Thank you all for your help. If anyone can post a picture of their pool (where the rope is anchored), I would be very greatful.
Thanks again
We have a vinyl liner pool and put our safety rope anchors into the coping above where the liner fits in. You can't tell from the photo, but the liner bead is well below where the anchor fits. The anchors are standard.
We've only built our own pool, but I think you or your builder should be able to get a drill bit that will drill through the coping and into your decking material -- no holes in the liner.
PICT0047.JPG
Thank you so much for the picture.
My inground vinyl linner pool has the rope anchors installed as shown in picture.