+ Reply to Thread
Results 1 to 8 of 8

Thread: How much chlorine to shock at open?

Hybrid View

  1. #1
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,714

    Default Re: How much chlorine to shock at open?

    Also when you shock a green pool, usually one addition is enough to see a difference but not enough to clear it. You need to add more bleach to your pool 2-3 times daily, enough to bring the chlorine level back up to your shock level (which is why you need the test kit), until it completely clears up. Keep the filter running 24/7 during the process, also, because the chlorine will kill the algae, but the filter is what will remove it from the pool.

    Janet

  2. #2
    Join Date
    Dec 1969
    Location
    MD.
    Posts
    37

    Default Re: How much chlorine to shock at open?

    The pool water is clear now - the chlorine level is still above 10.

  3. #3
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,714

    Default Re: How much chlorine to shock at open?

    At this point you need to know your CYA level to know where to maintain the chlorine.

    Janet

  4. #4
    Join Date
    Dec 1969
    Location
    MD.
    Posts
    37

    Default Re: How much chlorine to shock at open?

    CYA is 50, and the chlorine is now 2. The chlorinator manual (Clormatic salt chlorinator) recommends potentially higher cya of 50 to 70, but I've never understood why a chlorinator would cause a need for more cya, except that it does not produce chlorine with stablilizer. Any recommendations would be appreciated.

  5. #5
    Join Date
    Dec 2004
    Location
    Indiana.
    Posts
    700

    Default Re: How much chlorine to shock at open?

    Quote Originally Posted by DanS View Post
    CYA is 50, and the chlorine is now 2. The chlorinator manual (Clormatic salt chlorinator) recommends potentially higher cya of 50 to 70, but I've never understood why a chlorinator would cause a need for more cya, except that it does not produce chlorine with stablilizer. Any recommendations would be appreciated.
    Are you talking about a salt water chlorinator? They normally need the higher CYA level to maximize cell life. It appears that the shocking action that occurs in the cell reduces the problems normally associated with higher CYA. Otherwise 2ppm is too low for your CYA.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts