+ Reply to Thread
Results 1 to 10 of 12

Thread: Liner Problem

Hybrid View

  1. #1
    jrv331 is offline Registered+ Thread Analyst jrv331 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    113

    Default Re: Liner Problem

    Well heres what I've tried so far:
    Magic erase alone - had no effect
    PH Decreaser - no effect
    Proteam Vinyl Cleaner - no effect.

    I gonna try the vitamin C and paste mixture tomorrow. Its been warm her in ohio, we hit 92 yesterday. 88 today and high 80's tomorrow. The pool water is only 62 though. I just put the solar cover on today.
    Thanks
    John

  2. #2
    jrv331 is offline Registered+ Thread Analyst jrv331 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    113

    Default Re: Liner Problem

    Well I tried using Vitamin C, Borax and Baking Soda. All had no effect on the stain. Any other suggestions?
    Thanks
    John

  3. #3
    jrv331 is offline Registered+ Thread Analyst jrv331 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    113

    Default Re: Liner Problem- Bump

    Im hoping I can get a few other to chime in here. So far I have tried everything I can think of except straight muratic acid and nothing will take this stuff off. I pulled the top rails off and its not stain from rusting screws. It has not gotten any worse since pool opening.

    Could this be it: last year I used a floating chlorinator and at times it sat in one spot over night stuck under the solar cover. Could the damage be from excessive clorine contact?

    Other than looking unsightly the liner seems ok and I am not experiencing any water loss. Im not replacing it until I have to.
    Thanks for all the help
    John

  4. #4
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,571

    Default Re: Liner Problem

    I dunno...it looks like scaling but the center definitely looks bleached. I wish I had a better answer for you.
    Carl

  5. #5
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Posts
    2,210

    Default Re: Liner Problem

    By any chance, did you have Trichlor pucks in a floating dispenser in the pool? If the dispenser parked itself in one place, then the acidity and high chlorine level could bleach out and even weaken the liner in that area. [EDIT] Ignore what I just said. You said that this affected area is ABOVE the water line and I can now clearly see that from your pictures. [END-EDIT]

    [EDIT2] Well, if I actually READ every post, I might learn something! You actually said you did use a floating dispenser so that would in fact produce very acidic (low pH) and highly chlorinated (high FC) water in the vicinity of the feeder when the pump was off. The only thing is that this would explain bleaching in the area where the water contacts the liner, but I don't see how that would bleach the area above the waterline. If the water level did ever get near the top (from rains?), then that would explain it, but you said the water level never got that high. [END-EDIT2]

    Richard
    Last edited by chem geek; 07-01-2008 at 03:36 PM.

  6. #6
    Join Date
    Apr 2006
    Location
    Apache Junction, Az
    Posts
    475

    Default Re: Liner Problem

    Hi, the picture looks to me like early stages of dry rot. It always happens above the water line. It takes many years before any serious damage will be done. Eventually the liner will become dry and brittle and start to fall apart. Many years down the road. The only cure is to keep the sun off it.

    Later, Dennis
    AG pool installer
    Arizona

  7. #7
    Join Date
    Dec 1969
    Location
    Lowell MA USA
    Posts
    62

    Default Re: Liner Problem

    I can only add this:

    When you say "I just opened my pool" do you mean after it being winterized and closed for the season? If it happened during the course of a a whole "winter" (or whatever the off season is in your area), it could be a lot of things. Just about anything could have slid down the pool walls at those locations and caused it. Liquid fertilizers being used on your lawn by a contractor, some one sealing your wooden deck with a chemical product, acid rain. Did anything like that occur in the area of the pool while it was closed?

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts