Saturation Index (SI), SWG, and Above Ground Pools

[Poolsean]

Hi Bob,

Thanks for selecting Pool Pilot.

With SCG systems, there is little concern with water chemistry in the corrosive side. With the SI in the scale forming side, there is a greater tenedency for calcium scale to build up on the blades, which is not good.
I would recommend increasing your CH to about 200 ppm.
Leave the TA where it is.

[16X32AG_Bob]

Thanks Sean,

An easy and uncomplicated adjustment. Just as pool care should be.

PS - Pool Pilot has been installed/working for just under a week now. While I have been taking daily CL measurements, I haven't had to add any CL and have been maintaining FC of 2 to 5 with swimmer loads of 3-4 kids 2-3 hrs/day. This Summer should go smoothly.