+ Reply to Thread
Results 1 to 4 of 4

Thread: First-time owner trying to get CYA right

Hybrid View

  1. #1
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,714

    Default Re: First-time owner trying to get CYA right

    Hi, and welcome to the forum! It's nice to have a fellow Louisianian around!! What part of the state are you in?

    The WalMart 6 way kit only measures TC, so you don't really have a way to break it down into combined and free. However, if the water is turning greenish, you need to shock it by getting the chlorine up to 12 ppm and holding it there until it clears, which you already have done.

    Without the stabilizer, the chlorine is being eaten up by the sun as well as anything in the water, so until the stabilizer dissolves and registers in your water, you're going to need to keep the Cl at 3-5 ppm, by frequent additions during the day. Also, if you'll bump it up a little at night, it'll have the whole night without sun interference to work on anything "nasty" in your water. Just as a point of reference, each 1/2 cup of 6% bleach will raise your Cl by 1 ppm if your pool volume is 1500 gallons.

    I would suggest that you start with about 1/2 cup of stabilizer and put it in an old tube sock or old knee hi hose and hang it in front of a return. That way you can keep an eye on the rate at which it's dissolving--but don't bother to test for it for at least 4-5 days or you'll just be wasting reagent. In the meantime, keep up the chlorine additions until you have the stabilizer to help you keep it in the water. After 4-5 days, test again and you can go from there. A good target to start with is 20 ppm but depending on your pool location you might find that you need to raise it a bit. You might also find that the pH starts to come down some with the CYA addition. If not, you can either leave it alone at 7.8 (my pool likes it there and returns to 7.8 even if I try to fight it) or add a little muriatic or dry acid to bring it down to the 7.2-7.6 range.

    Janet

  2. #2
    Join Date
    May 2010
    Posts
    2

    Default Re: First-time owner trying to get CYA right

    Thanks so much for your help! We're in Walker, a short distance outside Baton Rouge. I have the CYA dissolving and will let you know when I get the results. As expected, the TC is dropping but I am trying to maintain it around 3ppm for at least the next few days until the stabilizer has a chance to do its thing.

  3. #3
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,714

    Default Re: First-time owner trying to get CYA right

    Let us know how it's going.....

    Janet

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts