Taylor test kit first results

[CarlD]

OK, but you don't measure TC with the FAS-DPD kit. You measure FC and CC.

So...if your FC was 1 and your CC was .2 THEN your TC is 1.2.

But it may not be. If CC measures at .2, then minimum then it may be .1 or less. It merely means there is SOME CC. And if it's coming in at .2 then don't worry about it.

[JazzMan2010]

Thanks for the response. I was just taking the FC and CC adding them up to get TC.

[Poolsean]

Leave your alkalinity where it is. You're fine with maintaining between 80 -120 ppm, but 80 - 100 is better.
Did you happen to test Calcium Hardness?

What is your salt level (not part of the K2006 kit though)?
The rest looks good.