+ Reply to Thread
Results 1 to 10 of 43

Thread: Help Deciphering My Taylor Test Results

Hybrid View

  1. #1
    labdi01 is offline Registered+ Thread Analyst labdi01 0
    Join Date
    May 2010
    Posts
    77

    Default Re: Help Deciphering My Taylor Test Results

    Switched back to bleach on Sunday! I'm just blindly adding it right now, until I get more reagent (it's on its way).

    But I did finally swim in it last night for the first time.
    Dianna
    New owner of 24' above-ground pool, vinyl liner, 1 hp pump and sand filter, added D.E.

  2. #2
    labdi01 is offline Registered+ Thread Analyst labdi01 0
    Join Date
    May 2010
    Posts
    77

    Default Re: Help Deciphering My Taylor Test Results

    Finally got my reagents today. I was nervous about what might be going on in there, while I couldn't spy.

    My chlorine is really high (42.5)!!! I haven't added any bleach since Monday - 1.5 gals. The rest of my numbers look OK

    pH - 7.2
    CYA - 35
    CC - 0

    So I finally got rid of the CC - but what can I do about the high chlorine, other than leave it and hope for a sunny day? I haven't been using pucks, either.
    Dianna
    New owner of 24' above-ground pool, vinyl liner, 1 hp pump and sand filter, added D.E.

  3. #3
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,244

    Default Re: Help Deciphering My Taylor Test Results

    I bet you got rid of your CC if your cl really is 42.5!!!! You might want to double check that test again. There really isn't anything you can do to lower cl. Lots of sunny days will drop it.

  4. #4
    labdi01 is offline Registered+ Thread Analyst labdi01 0
    Join Date
    May 2010
    Posts
    77

    Default Re: Help Deciphering My Taylor Test Results

    I hope my reagent isn't bad - I just got it today (the CL reagent was what I had to order). I'll use the other container of 0871 that I got (I ordered 2). I'll repost as soon as I retest.

    Yeah, I'm thinking a FC level of 42.5 will kill just about anything!!! But CC is down to 0 P
    Dianna
    New owner of 24' above-ground pool, vinyl liner, 1 hp pump and sand filter, added D.E.

  5. #5
    labdi01 is offline Registered+ Thread Analyst labdi01 0
    Join Date
    May 2010
    Posts
    77

    Default Re: Help Deciphering My Taylor Test Results

    Well, I just tested the water again (5 hrs since last test). I used the second bottle of 0871 I just received today.

    NOW my FC is 41 and CC is 1 - - how is that even possible?

    What to do now...

    I ordered the reagents from The Pool Source - but it IS Taylor brand.

    Should I presume at this point that the reagent is bad? Is it possible to go from just under 20 ppm FC to 41+ w/ 2 gals of 5.25% bleach? And if so, is it possible it held for over 48 hours?

    I'm no mathemagician - but that just doesn't add-up to me!
    Dianna
    New owner of 24' above-ground pool, vinyl liner, 1 hp pump and sand filter, added D.E.

  6. #6
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,244

  7. #7
    labdi01 is offline Registered+ Thread Analyst labdi01 0
    Join Date
    May 2010
    Posts
    77

    Default Re: Help Deciphering My Taylor Test Results

    The pool is 24' round AG. So, we're 13.5+K gals.

    This doesn't make sense. What's your initial instinct?

    I put 1/2 gal in on Monday am. We had 6 people in the pool for several hours Monday afternoon. That evening, I put 1.5 gals in. I haven't put any more in since. We had 3 more kids on Tuesday.

    We back washed, added DE and vacuumed to waste this am prior to receiving reagents.

    And then to get a CC chlorine reading tonight? Is it me - or does this sound wonky?
    Dianna
    New owner of 24' above-ground pool, vinyl liner, 1 hp pump and sand filter, added D.E.

+ Reply to Thread

Similar Threads

  1. Same Taylor Test Kit K-2005 - (Different Results)
    By wapate in forum Testing and Adjusting Pool Water Chemistry
    Replies: 10
    Last Post: 06-14-2012, 02:49 AM
  2. First Test Results with Taylor Kit
    By sunNfun in forum Dealing with Alkalinity and Calcium
    Replies: 4
    Last Post: 06-19-2011, 11:29 PM
  3. Taylor test kit first results
    By JazzMan2010 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 7
    Last Post: 06-03-2010, 02:07 PM
  4. Taylor Test Kit Results
    By rfreeman in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 07-02-2006, 06:40 PM
  5. How to interprete Taylor Kit results
    By mphare in forum Testing and Adjusting Pool Water Chemistry
    Replies: 8
    Last Post: 05-31-2006, 10:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts