Results 1 to 10 of 228

Thread: Clear, but no chlorine???

Threaded View

  1. #11
    mary jo is offline Subscriber Thread Analyst mary jo 0
    Join Date
    Aug 2014
    Location
    Batavia, IL
    Posts
    81

    Default Re: Clear, but no chlorine???

    It rained last night, so hubby is going in the pool this morning (after playing tennis). I'll suggest he rinse off beforehand.

    OK- BigDave- I must admit when you mentioned experimenting with 2 scoops of DPD my first thought was: hmm, you are testing for possible user error, which, given my # of rookie mistakes I'd say makes sense… but it turns out i DID get different results.

    Yesterday's testing (8-28) The pool's numbers @ opening: FC=29 CC=2.5 Brushed the pool.

    I ran FC/CC tests @ 4:00pm, 10ml sample, added my standard "1 heaping scoop" (because heaping is my standard), and got: FC= 25. CC=3.0

    Same test w/ 2 scoops: FC=27. CC= 2.5
    Then I tried 3 scoops: FC=31. CC=2
    THEN I tried 1/2 scoop: sample "flashed" pink and then went clear again.

    Hmmm- added a jug of bleach to the pool and waited several hours.....

    Yesterday evening @ 8:30pm I tested using 1 and 2 scoops to see what would happen:
    1 scoop: FC =30. CC=3.0
    2 scoops: FC=32. CC=2.5
    Did 2 scoops again: FC=32. CC= 2.5

    This morning- tested @ 7am:
    1 scoop FC=30 CC=2.5
    2 scoops FC=32 CC=2

    what's going on- or am I just an erratic tester?

    also: just tested TA and pH: pH off the chart (but you mentioned this would happen w/ high FC), but
    TA went from green to blue to pale yellow (after 14 drops). ???
    Last edited by mary jo; 08-29-2014 at 11:18 AM. Reason: added TA and pH info
    15K gal, 15x30 rectangular, in-ground, vinyl liner, Pentair ¾ HP Whisperflo on 24/7, Pentair Cartridge Filter(CCP240), Heater (gas), Automatic Pool Cover

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts