Can't get the light out!

[terpsucka]

Ok, I got it out. You were right, there was some gunk in there preventing the bezel from easily slipping off the pin. A little rubber mallet action did the trick!! Everything "looks" normal in there, so it's on to the dye tests.

[Searcher]

Ok, I got it out. You were right, there was some gunk in there preventing the bezel from easily slipping off the pin. A little rubber mallet action did the trick!! Everything "looks" normal in there, so it's on to the dye tests.

Wonderful! I sure am glad that you posted back to let us know that a recommendation worked.