Update........last night I put in (2) 182-oz jugs of 6% bleach at about 6pm and let it run for a while. I tested the water about 2-hrs later and saw my FC actually was down to 4.0 (and my test did show the presence of CC this time around.) So about 8pm I put in two more 182-oz jugs of the 6% bleach and let the pump run all night.

This morning I tested the water and this is the reading:

FC = 4.4
CC = 4.0
PH = 7.1
ALK = 90
CA = <30

The water looks just as cloudy as it did yesterday, no significant change at all.

Am I not being patient enough or did I not hit this pool with enough bleach to do the job? At this rate I should purchase a pallet of the stuff if I continue to need more.

As always I would appreciate your thoughts.

Thanks,
-Brian