+ Reply to Thread
Results 1 to 10 of 43

Thread: Help

Hybrid View

  1. #1
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,714

    Default Re: Help

    Either way, you need to check and see if you're losing chlorine overnight that can't be attributed to the sun. If you are, then the answer is to continue holding it at shock level until you are no longer losing any chlorine to "stuff" in the water.


    Janet

  2. #2
    Join Date
    Jan 2011
    Location
    Baton Rouge, Louisiana
    Posts
    22

    Default Re: Help

    We had to drain water last night and it has stormed most of the night. I will drain and shock as soon as day breaks and keep it shocked until clear. I will post new numbers this afternoon.

  3. #3
    Join Date
    Jan 2011
    Location
    Baton Rouge, Louisiana
    Posts
    22

    Default Re: Help

    .6 fc
    .15 cc
    8.0 ph
    90 ta
    350 ch
    55 cya

  4. #4
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,714

    Default Re: Help

    Your Chlorine needs to be at an absolute minimum of 5 ppm unless you want algae to start growing--but because it's been low for a few days, especially with the rain in between, I think you probably already have algae blooming, which is why your pool isn't clear. Raise your chorine to shock level and hold it there to clear it up, until you're not losing chlorine overnight.


    Janet

  5. #5
    Join Date
    Jan 2011
    Location
    Baton Rouge, Louisiana
    Posts
    22

    Default Re: Help

    Test this morning:

    65 FC
    5 CC
    7.2 PH
    100 TA
    360CH
    55 CYA

  6. #6
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,244

  7. #7
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Posts
    2,210

    Default Re: Help

    If you are using a 25 ml sample size, you need to divide the number of drops by 5 (i.e. multiply by 0.2) to get FC and CC levels. If you are using a 10 ml sample size, you need to divide the number of drops by 2 (i.e. multiply by 0.5).

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts