Yes, Sorry. I see a typo in the last bit. But to confirm. I added powder (870 ) til pink then 871(brown bottle) until clear then added r003 (clear bottle) to the same sample until it was pink again then 871 (brown bottle) until it was clear again.

I just did that test again and got 7ppm FC and 9ppm CC.

Since I don't think it hurts to have too much chlorine at this point I just added 3 more 182oz jugs (slightly more than the calculator called for to get to 15ppm) of bleach, this time through the skimmer in the hopes it would spread more? But I'm not sure that would make much of a difference.

I brushed the whole pool carefully again today and did see some debris kicked up so I put the polaris in the pool for a short time (didn't know what the high chlorine would do to it) and got a couple bags of debris up. Last go round the bag was mostly empty so I'm pretty sure there are no algae piles lying around.

I'll test again before I go out to dinner in 30 minutes or so and see what the FC chlorine is.

FYI, when I applied the bleach this time, there was a fair amount of foaming. This has happened sometimes and not others. I haven't been able to pinpoint why it foams sometimes and not others.

Hope this helps...

Jason