+ Reply to Thread
Results 1 to 10 of 84

Thread: Time to replace sand?

Hybrid View

  1. #1
    jonno is offline Subscriber Thread Analyst jonno 0
    Join Date
    Jun 2011
    Location
    Brookeville, MD
    Posts
    54

    Default Re: Time to replace sand?

    Evening numbers - pool color is changing from blue to yellow green!
    FC 0.0
    CC 3.0
    pH 7.2
    TA 180
    I added another pint of acid this morning and will get some more tomorrow to keep the pH low, but today the color of the water no longer has any blue coloration and is more lemon lime. Visibility is still only 20-24 inches. This is nerve-racking. I really don't want to replace the water. Ben, Janet, Watermom - is there anything else I should be doing?
    Taylor K-2006, IG Vinyl 26,000g, Sand filter 275 lbs, 3/4 HP Hayward Super Pump II, CYA over 100, Using 12.5% bleach

    18'x36' rectangle 26K gal IG pool; Liquid Chlorine 12.5% ; Sand Filter 275 lbs. sand filter; Hayward Super Pump II 3/4 HP pump; 23 hrshrs; Taylor K-2006; delivered via truck; summer: ; winter: ; iPad; PF:4.6

  2. #2
    jonno is offline Subscriber Thread Analyst jonno 0
    Join Date
    Jun 2011
    Location
    Brookeville, MD
    Posts
    54

    Default Re: Time to replace sand?

    Morning report - color still yellow green, little bit of foam on surface. Still aerating and adding 6 gallons of bleach nightly.
    FC 0.0
    CC 2.5
    pH 7.2
    TA 180
    Happy Father's Day everyone who is or has a dad.
    Taylor K-2006, IG Vinyl 26,000g, Sand filter 275 lbs, 3/4 HP Hayward Super Pump II, CYA over 100, Using 12.5% bleach

    18'x36' rectangle 26K gal IG pool; Liquid Chlorine 12.5% ; Sand Filter 275 lbs. sand filter; Hayward Super Pump II 3/4 HP pump; 23 hrshrs; Taylor K-2006; delivered via truck; summer: ; winter: ; iPad; PF:4.6

  3. #3
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,571

    Default Re: Time to replace sand?

    POPP! Pool Owner Patience and Persistance!

    Carl
    Carl

  4. #4
    jonno is offline Subscriber Thread Analyst jonno 0
    Join Date
    Jun 2011
    Location
    Brookeville, MD
    Posts
    54

    Default Re: Time to replace sand?

    Evening numbers:
    FC 0.0
    CC 2.0
    pH 7.3
    TA 180
    Headed out to get more acid to keep the pH at 7.0, but glad to see that the CC finally is in the 1 - 2 range. Thanks for the reminder about POPP Carl.
    Taylor K-2006, IG Vinyl 26,000g, Sand filter 275 lbs, 3/4 HP Hayward Super Pump II, CYA over 100, Using 12.5% bleach

    18'x36' rectangle 26K gal IG pool; Liquid Chlorine 12.5% ; Sand Filter 275 lbs. sand filter; Hayward Super Pump II 3/4 HP pump; 23 hrshrs; Taylor K-2006; delivered via truck; summer: ; winter: ; iPad; PF:4.6

  5. #5
    jonno is offline Subscriber Thread Analyst jonno 0
    Join Date
    Jun 2011
    Location
    Brookeville, MD
    Posts
    54

    Default Re: Time to replace sand?

    On 6/17 Janet wrote:
    "So..his (Ben's) recommendation was to break it (the ammonia) down slowly with the lower doses of bleach, until you start getting CC readings of 1 or 2--at which time you can up the doseage and go ahead and get rid of it. So...stick with the 6 gallon dose for now."

    This is the 2nd day that my CC was 2 or lower. Is it time to up the dosage of bleach?

    Here're this evening's numbers:
    FC 0.0
    CC between 1.5 and 2.0
    pH 7.4 (put in 30 oz dry acid)
    TA 190

    Thanks!
    Taylor K-2006, IG Vinyl 26,000g, Sand filter 275 lbs, 3/4 HP Hayward Super Pump II, CYA over 100, Using 12.5% bleach

    18'x36' rectangle 26K gal IG pool; Liquid Chlorine 12.5% ; Sand Filter 275 lbs. sand filter; Hayward Super Pump II 3/4 HP pump; 23 hrshrs; Taylor K-2006; delivered via truck; summer: ; winter: ; iPad; PF:4.6

  6. #6
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,207

    Default Re: Time to replace sand?

    If you want to go to a 9 gallon dose, that would be OK.

    If you can, use muriatic instead of dry acid. It's cheaper, stronger, and better for your pool. Of course it's more noxious to handle -- gloves, glasses & watch the fumes when you pour! But you're going to need to lower your alkalinity, so keep pushing the pH back down.

  7. #7
    jonno is offline Subscriber Thread Analyst jonno 0
    Join Date
    Jun 2011
    Location
    Brookeville, MD
    Posts
    54

    Default Re: Time to replace sand?

    Thanks Ben - I'll up the dose to 9 gallons starting with this evening's dose.
    FC 2.5 (first time I've seen FC in a while)
    CC 2.0
    pH 7.3 I switched back to muriatic acid this morning.
    TA 190-200
    Taylor K-2006, IG Vinyl 26,000g, Sand filter 275 lbs, 3/4 HP Hayward Super Pump II, CYA over 100, Using 12.5% bleach

    18'x36' rectangle 26K gal IG pool; Liquid Chlorine 12.5% ; Sand Filter 275 lbs. sand filter; Hayward Super Pump II 3/4 HP pump; 23 hrshrs; Taylor K-2006; delivered via truck; summer: ; winter: ; iPad; PF:4.6

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts