Suction

[Rkh3]

New issue this year. There is so much suction in the vac line that the end of it sucks tight to the bottom of the pool. What would cause this?

[Watermom]

What condition is your vacuum head in? The reason I ask is that earlier this year, I was having the same kind of problem. When I inspected the bottom of my vac head, I discovered that the many of the bristles were missing which allowed the vac head to get too close to the liner. Bought a new one and the problem was solved. That may not be what is happening in your situation, but just tossing it out there as a possibility.