+ Reply to Thread
Results 1 to 4 of 4

Thread: Help shorted myself with sand on ag pool installation

Hybrid View

  1. #1
    posguy is offline Registered+ Thread Analyst posguy 0
    Join Date
    Dec 2004
    Location
    Bayshore Area.NJ
    Posts
    66

    Default Re: Help shorted myself with sand on ag pool installation

    If im reading this correctly, the paver is sitting on the ground vs buried ie top of paver flush with original earth. I would fix it as the bottom track is now sitting on an inch of sand vs compacted earth. The cove will very easily wash out, liner will pop and you will have say 18k gallons of water going somewhere. The paver top should be flush with the ground,
    the uprights sit on the paver and the bottom track sits on undisturbed earth, two inches of sand then go in pool.

  2. #2
    Join Date
    Aug 2010
    Posts
    3

    Default Re: Help shorted myself with sand on ag pool installation

    Pavers have to be flush with the base, there's no way around it and no way to cheat it, your pool will hold a tremendous amount of weight.
    If you think it's alot of work now wait until your done and you fill it up and then it leaks and you have to drain it and rip it apart and fix it.
    Fix it now while you can.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts