Results 1 to 10 of 16

Thread: Mixed Chemicals = Cloudy Swim Spa / Pool

Threaded View

  1. #14
    Join Date
    Jun 2011
    Posts
    5

    Default Re: Mixed Chemicals = Cloudy Swim Spa / Pool

    OK, Thanks. I do have the Taylor kit (Taylor Complete (high) DPD Test Kit K-2005). The problem is that the FC is off the chart (Leslie Pools also found the same thing). I've been trying to lower it, but without direct sunlight its not easy. The PH is a bit low (around 7.0). TA is in the 80s.

    As for the heating, there are a few things that cause the expense. The run from the heater to the pool is about 45 feet and uses PVC, and the $1,000 quoted is for the month, which includes 30 days of running around 10 hours a day to keep it at 95 degrees. We only have a solar cover since the heavier covers which trap more heat are to heavy for my wife.

    I did just check and the clarity has improved, but it sounds like it still make sense to dump the water and start over. I just pulled out my Endless pool documentation and they recommend 1/2 cup clorox per day for indoor pools. I will start there unless anyone has a better suggestion.

    Thanks again.
    Last edited by milhouse19; 06-22-2011 at 10:52 PM. Reason: Finished more research

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts