+ Reply to Thread
Results 1 to 10 of 30

Thread: new home owner -- new pool owner -- clear as MUD

Hybrid View

  1. #1
    Join Date
    Jul 2010
    Posts
    14

    Default Re: new home owner -- new pool owner -- clear as MUD

    please help ASAP!! I can't seem to get to the inside of my filter to even see if there is sand...I have the inlet and outlet pipes disconnected as well as the backwash pipe disconnected. I cannot for the life of me get off the top of the filter --- do I just keep twisting? It wont' even budge ---- I have opened the air and water tubes -- even took off the screws that hold the switcher on -- please help me!!
    Vinyl lined, fiberglass in ground 16000 gal pool
    Jandy ST-T sand filter MN ST24-T & PlusHP 1.5 HP MN PHPF1.5 motor
    Polaris Halcyon booster pump PB4-60Q -- Hayward Chlorine Feeder CL200
    Jandy LXi heater -- ORDERED Taylor K2006

  2. #2
    Join Date
    Jul 2010
    Posts
    14

    Default Re: new home owner -- new pool owner -- clear as MUD

    still unable to get this done...anyone with some help?
    Vinyl lined, fiberglass in ground 16000 gal pool
    Jandy ST-T sand filter MN ST24-T & PlusHP 1.5 HP MN PHPF1.5 motor
    Polaris Halcyon booster pump PB4-60Q -- Hayward Chlorine Feeder CL200
    Jandy LXi heater -- ORDERED Taylor K2006

  3. #3
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,714

    Default Re: new home owner -- new pool owner -- clear as MUD

    Let me get Ben's or Al's attention back to this thread--they're much better with equipment than I, but don't want you to think we're ignoring you...

    Janet

  4. #4
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,207

    Default Re: new home owner -- new pool owner -- clear as MUD

    I'm afraid I've never seen that filter, and don't really know anything about how to get it apart.

    Sorry.

  5. #5
    Join Date
    Jul 2010
    Posts
    14

    Default Re: new home owner -- new pool owner -- clear as MUD

    ok, so as you guys suspected...the filter gave out...water came out the middle. In any case, nwo we need to do the repairs as you suggested. BUT I cannot really find the pentair tr30. Is there a link you can give me to help me buy it? Is there another option I have? thanks for everything
    Vinyl lined, fiberglass in ground 16000 gal pool
    Jandy ST-T sand filter MN ST24-T & PlusHP 1.5 HP MN PHPF1.5 motor
    Polaris Halcyon booster pump PB4-60Q -- Hayward Chlorine Feeder CL200
    Jandy LXi heater -- ORDERED Taylor K2006

  6. #6
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,207

    Default Re: new home owner -- new pool owner -- clear as MUD

    Quote Originally Posted by Andyman33 View Post
    BUT I cannot really find the pentair tr30. Is there a link you can give me to help me buy it?
    I was being stupid: I meant the 24" Pentair TR60 or the 30" TR100, not the fictitious TR24 or TR30.

  7. #7
    Join Date
    Jul 2010
    Posts
    14

    Default Re: new home owner -- new pool owner -- clear as MUD

    couple of other questions...I'm assuming that I can't reuse the spider valve that is currently on mine now since its a top mount now and the tr60 is a side mount. Which valve do I get? there are a couple of options by pentair. Also, I'm hoping that I can just use the pump I currently have since it is working fine and just buy the filter. Lastly, I can do plumbing and hopefully with your help I can purchase the correct parts. Is there any reason to hire this out to a professional? Thanks
    Vinyl lined, fiberglass in ground 16000 gal pool
    Jandy ST-T sand filter MN ST24-T & PlusHP 1.5 HP MN PHPF1.5 motor
    Polaris Halcyon booster pump PB4-60Q -- Hayward Chlorine Feeder CL200
    Jandy LXi heater -- ORDERED Taylor K2006

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts