The pump did prime at lunch time yesterday so i was able to start the filter as I do have a separate valve on the skimmer. I also back washed it first to get rid of the water that was in the filter and to clean it. The pool looks good. Not sparkling, but I wouldn't say cloudy. I'm just thrilled to be able to see the bottom again, but now please help me make it sparkle!!!

I'm also amazed at the test results I pulled this morning considering the only thing we've put in there was a gallon of bleach. I know, I know, you told me 1/2 a gallon, but my husband said that wouldn't do anything, so I added the other half. No more listening to him when it comes to the pool, I promise!!! My readings are below:

FC = 14 ppm - did i do that right? (5 with my smaller Taylor kit)
CC = 2 (I get 2 with the smaller Taylor kit)
TC = 3
PH = 7.7
Alk = 80
Hardness = 50
CYA = less than 30 - I filled up the tube, but could always make out the dot

I don't know what to add first or how much and then at what point do I add salt, how much and when to turn it on.

Thanks for your help!