+ Reply to Thread
Results 1 to 7 of 7

Thread: Advice Needed for AutoClear Cell from 2008

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    Ft Lauderdale, Fl
    Posts
    657

    Default Re: Advice Needed for AutoClear Cell from 2008

    Ben, the Autoclear is a Polaris system...Hayward will not help, as they were bought out by Zodiac. I only recommended a flow switch similar to the AutoPilot or Hayward style because the AutoClear cell has the flow switch integral to the cell. The AutoClear flow switch is similar in design and is a basic normally opened/normally closed type switch, which can be tested with a multimeter. Usually if this is the problem, your power supply will show a code or warning light specifically for a flow condition.
    If the cell is dead, then replacing it should get you back in operation.
    Google search for AutoClear Chlorine Generator showed cells still available on line. Not sure if this is accurate or not.
    Sean Assam
    Commercial Product Sales Manager - AquaCal AutoPilot Inc. Mobile: 954-325-3859
    e-mail: [email protected] --- www.autopilot.com - www.aquacal.com

  2. #2
    Join Date
    Apr 2012
    Location
    Arkansas
    Posts
    4

    Default Re: Advice Needed for AutoClear Cell from 2008

    Thanks for the advice! I'm may see if I can find a replacement cell online. Or, I may just say the heck with it and go to chemicals. Probably cheaper and easier in the long run.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts