New problem, off subject, i had turned my swcg off while i did the bleach. Today when i turned the power back on, the display is now acting up. Doesnt show salt content or water temp. Shows a few things, but others are blank.
New problem, off subject, i had turned my swcg off while i did the bleach. Today when i turned the power back on, the display is now acting up. Doesnt show salt content or water temp. Shows a few things, but others are blank.
18x36 3.5 - 8' depth, IG pool with SWCG; ~21K gal
First thing to try, with almost all electronics, is a full power cycle, as in kill the power to the power supply.
If that doesn't work let us know exact make / model of your unit.
Might be where i screwed up. Instead of just turning it off i turned its breaker off. So it had no power supply. I did this several times when the screen was screwing up. Its an aquarite, but i will get exact model tomorrow, storming outside right now.
18x36 3.5 - 8' depth, IG pool with SWCG; ~21K gal
So ............. did you swim???
Oh yeah, it was about 93* outside and the kids and neighboring kids had a blast!!!! Thanks so much for all the help you all continue to give.
18x36 3.5 - 8' depth, IG pool with SWCG; ~21K gal
Ok, now I'm a little envious .......... I'm still awaiting my first swim of the season in my pool! Have fun and you're welcome! We are glad to help!
Maybe you will get to enjoy it soon enough. We have been swimming since the end of February. The water was cold, but we had 85* temps.
18x36 3.5 - 8' depth, IG pool with SWCG; ~21K gal